Out of the box

Do it.

Extending or upgrade the seeed reComputer J1020

Posted on 2025-02-18 by einsamsoldat

Part number used for the board in the seeed reComputer J1020 connecting to the nVidia Jetson SODIMM module is reComputer J202 – Carrier Board for Jetson Xavier NX/Nano/TX2 NX.

reComputer J202 Carrier Board for Jetson Xavier NX with compact function design and same size of NVIDIA® Jetson Xavier NX™ carrier board – Seeed Studio

Based on the spec sheet in the web site above, the J202 carrier board. Can be used to host the Jetson Xavier NX, Jetson Nano and Jetson TX2 NX.

Other than the Jetson Nano, any other Jetson module that is compatible with the J202 carrier board will requires a heatsink with active fan.

Recommended heatsink with active fan Manufacturer Part Number (MPN)s are as follows:

ATS-NVA-2781-C1-R0

114992687

Adding compatible SSD into seeed reComputer J1020

Posted on 2025-02-13 by einsamsoldat

Adding SSD into will requires M.2 nvme into the reComputer J1020, this post is based on Memory Expansion | Seeed Studio Wiki

The documentation is a bit vague on the NVMe SSD to be used other than very basic instructions. However, in my attempt it is smooth.

The SSD that was chosen as the expansion storage is the Kingston NV2 PCIe NVMe M.2 500GB. The J1020 requires the SSD to be M key.

Continue reading →